How to pay international suppliers: methods, cross-border fees and the best way to pay
Paying a supplier abroad means choosing a payment method, a currency and who pays the fees, and each choice changes what the supplier receives and what you pay. This guide compares the main ways to pay overseas suppliers, explains what cross-border fees are, and sets out how to keep the total cost down.
The short answer
- Agree the terms first: the invoice currency, who pays the fees, and the payment date.
- Pay in the supplier’s currency, converted by your own provider, so you see the rate before you confirm.
- Compare total cost: the FX margin, the transfer fee, any intermediary deductions and the receiving bank’s fee, not just the headline fee.
- For regular payments, a provider that pays out locally is usually cheaper and more predictable than a bank wire. For very large or unusual payments, a wire may be the only route.
- Verify bank details through a channel you already hold before every first payment and every change.
What is a cross-border fee?
“Cross-border fee” means slightly different things depending on how you pay.
On card payments, the card networks assess a cross-border fee when a card issued in one country is used with a merchant in another. The merchant’s payment processor usually passes it on to the merchant as part of the transaction cost, and it is separate from any currency conversion. If you pay a supplier by card, the fee is normally the supplier’s cost, which is one reason some suppliers add surcharges for foreign cards or prefer bank transfers.
On bank transfers, “cross-border fees” usually means three charges:
- The sending fee your bank or provider charges for the payment.
- Intermediary deductions taken by banks along a SWIFT route, depending on the charge option.
- The receiving bank’s fee, if it charges for incoming international payments.
On top of these sits the FX margin: the gap between the mid-market rate and the rate you are given. On most supplier payments it is the largest cost of all. In the Financial Stability Board’s October 2025 report, the average cost of sending US$20,000 as a business-to-business payment across a border was 1.6%, and about 87% of that was the exchange rate. Our guide to FX international payments explains how the margin works.
Hidden costs in cross-border payments
The hidden costs in cross-border payments are the ones not shown as a fee: the FX margin inside the exchange rate, deductions by intermediary banks, the receiving bank’s charges and the cost of delays. The Financial Stability Board puts the average cost of a US$20,000 business payment at 1.6%, and 87.1% of that is FX. Ask what will arrive.
- The FX margin. The gap between the mid-market rate and your rate is usually built into the exchange rate, not shown as a fee. In the FSB’s data the average FX cost of a US$20,000 business payment is 1.4%, against an average fee of 0.2%.
- Intermediary bank deductions. Banks along a SWIFT route can deduct fees, so less than you sent may arrive. Barclays UK says each bank may charge a fee for handling the payment, which it cannot determine in advance.
- The charge option (OUR, SHA or BEN). The option decides who bears the charges. Under SHA or BEN, deductions reduce what the supplier receives. Under OUR you pay all the charges, and a bank may collect a fixed overseas charge up front.
- The receiving bank’s fee. The FSB’s 2025 survey found receiver-side costs averaging 0.1% to 1.3% of the amount sent. They are either deducted from the payment or invoiced between the providers in the chain.
- Conversion by the receiving bank. If the supplier’s bank converts the currency, the FSB’s survey found an extra FX margin of 0.7% to 1.1% on average, at a rate neither of you sees in advance.
- Returned and failed payments. A payment sent to the wrong details can come back, and the supplier is still unpaid. Barclays UK says an overseas bank might charge a fee for handling a payment before returning it.
- Delays. A late payment can miss an early-payment discount or strain a supplier relationship, even when no fee is charged. Allow for cut-offs, time zones and public holidays.
- Card cross-border fees. If you pay by card, the supplier bears the card networks’ cross-border fee and may pass it on as a surcharge.
To see them before you pay, ask for the exchange rate, every fee and the amount that will arrive, in writing. The sections below show how to keep the total down.
Ways to pay international suppliers
| Method | How it works | Cost and speed | Best for | Watch for |
|---|---|---|---|---|
| Bank wire (SWIFT) | Your bank sends a SWIFT payment, often through correspondent banks | FX margin plus a wire fee; intermediaries may deduct fees. Minutes to days | Large or one-off payments; destinations no provider covers | Short payments under SHA; the receiving bank converting for you |
| Local payout through a payments provider | The provider converts and pays the supplier over a domestic rail in their country | A visible margin plus a per-payment fee. Often same day | Regular supplier payments in major currencies | The provider’s corridors and cut-offs |
| Multi-currency account | You hold the supplier’s currency and pay from the balance | No conversion at the time of payment; you convert when you choose | Businesses that also earn in that currency | Whose name is on the account details |
| Card or virtual card | You pay the supplier’s invoice by card | The supplier pays acceptance and cross-border fees; you may pay a foreign transaction fee | Smaller invoices, subscriptions, suppliers that prefer cards | Surcharges, card limits and FX on your card statement |
| Payables platform | Software that manages invoices, approvals and payments, with a payment provider behind it | Subscription plus payment costs | Teams paying many suppliers in several currencies | Who actually moves and holds the money |
| Stablecoin settlement | Value moves on a blockchain in a currency-linked token, with bank money in and out | Network and conversion costs; minutes at any hour | Eligible businesses paying suppliers who can receive it | On- and off-ramps at both ends, and local rules |
Choosing the best way to pay overseas suppliers
| If your situation is… | A good fit is usually… | Why |
|---|---|---|
| Regular invoices in EUR, USD or another major currency | A payments provider that pays out locally | Visible margin, predictable fees, the supplier receives the full amount |
| You earn in the supplier’s currency too | Paying from a multi-currency balance | You avoid converting twice |
| A very large or unusual payment | A bank wire with the OUR charge option | Wide reach; OUR protects the amount that arrives |
| Many suppliers and approvers | A payables platform or an API-driven provider | Approvals, audit trail and reconciliation in one place |
| A small invoice from a supplier that takes cards | A card or virtual card | Convenient, if the supplier does not surcharge |
Agree the terms before you pay
Most problems with overseas business payments start before the payment is sent. Settle these with the supplier first, in the contract or purchase order:
- The invoice currency. Paying in the supplier’s currency usually works out cheaper and clearer than letting their bank convert.
- Who pays the fees. If the invoice must arrive in full, use the OUR charge option or a provider that pays out locally. Under SHA, intermediary deductions can leave the supplier short.
- The payment date and terms, allowing for time zones, cut-offs and public holidays in both countries.
- The bank details, confirmed through a channel you already hold, not one given in an email.
How to pay an overseas supplier, step by step
- Check the invoice and the bank details. For a new supplier, or any change to bank details, confirm by phone on a number you already hold.
- Choose the currency and the method. Usually the supplier’s currency, by local payout where available.
- Get a quote. Compare the rate with the mid-market rate at the same moment, and check the amount the supplier will receive.
- Choose the charge option if it is a SWIFT payment: OUR if the amount must arrive in full.
- Approve and send, with a second approver above your threshold.
- Track the payment to the supplier’s bank and confirm receipt with the supplier.
- Reconcile the payment against the invoice and your ledger.
How to keep the cost of paying international suppliers down
- Pay in the supplier’s currency, converted by your own provider.
- Compare the margin, not the fee. A “free” transfer with a wide margin costs more than a paid one with a narrow margin.
- Avoid short payments with OUR or local payouts, so you are not asked to top up later.
- Batch payments to the same currency, so you convert once rather than many times.
- Hold the currencies you pay often, so you can convert when the rate suits you. Our guide to multi-currency accounts explains how.
Protect payments from fraud
Supplier payments are a favourite target for business email compromise (BEC), where fraudsters pose as a supplier and ask for payment to new bank details. The FBI’s Internet Crime Complaint Center received 24,768 BEC complaints in 2025, with reported losses of about $3.05 billion.
- Confirm any new or changed bank details by phone on a number you already hold.
- Use payee-name checks where they exist, such as Confirmation of Payee in the UK.
- Require two people to approve payments above a set amount.
- Treat urgency and secrecy in a payment request as warning signs.
Where KwiikPay fits
- Accounts. Named GBP, EUR and USD accounts in your company’s name, held apart from KwiikPay’s own money, so you can hold the currencies you pay.
- FX. Conversion between 40+ currencies with the margin over the mid-market rate shown before you confirm. See business FX.
- Payouts. Supplier payments across 30+ corridors to 80+ countries through regulated banking partners, by SEPA Instant, Faster Payments, Fedwire or SWIFT GPI depending on your plan. See cross-border payments.
- Records. Every payment is listed in your dashboard with its reference and status, and statements download as CSV. Depending on your plan, an API lets you pay many suppliers.
- Pricing. An FX margin set by your plan and a flat fee per payment for each rail; see the pricing page. KwiikPay does not offer card payments.
- Eligibility. KwiikPay onboards companies incorporated in the European Economic Area, the United Kingdom, Gibraltar, Switzerland and Canada, where any authorisation their activity requires is current. Companies elsewhere are assessed individually, with no presumption of approval. Account opening is by invitation: request an account and the team replies within one business day.
KwiikPay is a trading name of KWP Finance Limited — registered in Canada as a Payment Service Provider under the Retail Payment Activities Act (RPAA), supervised by the Bank of Canada, and as a Money Services Business with FINTRAC (MSB registration number C100000942), including dealing in virtual currency. These are registrations, not licences. KwiikPay is not authorised by the FCA. KwiikPay is not a bank; banking and e-money services are provided by regulated partner institutions.
Paying suppliers abroad every month?
Tell us your supplier countries, currencies and volumes and the right person will reply within one business day with a quote in writing.
Talk to sales Request an accountSources
Checked on 25 October 2026; the hidden-costs section was checked on 26 October 2026. This is general information, not financial advice.
- Financial Stability Board: G20 Roadmap consolidated progress report, October 2025, for the cost of a US$20,000 B2B payment and its FX share (Tables 7 and 8), and for receiver-side costs and receiving-provider FX margins (Box 11 and its notes).
- Barclays UK: Make international payments, for charge options, charges that other banks may add, and returned payments.
- FBI Internet Crime Complaint Center: 2025 annual report, for business email compromise complaints and losses.
FAQs
What is a cross-border fee?
A cross-border fee is a charge on a payment where the two sides are in different countries. On card payments it is a fee the card networks assess when a card issued in one country is used with a merchant in another, usually passed to the merchant by its payment processor. On bank transfers, 'cross-border fees' usually means the sending fee, any fees deducted by intermediary banks, and the receiving bank's fee. Currency conversion is normally a separate cost on top.
Who pays cross-border fees?
On card payments, the merchant usually pays the card networks' cross-border fee through its processor, although some providers pass it on to customers. On bank transfers, it depends on the charge option: with OUR the sender pays all charges, with SHA each side pays its own bank and deductions reduce what arrives, and with BEN the payee bears the charges.
What is the best way to pay overseas suppliers?
There is no single best way. For regular supplier payments in major currencies, a provider that converts at a visible margin and pays out locally in the supplier's currency is usually cheaper and more predictable than a bank wire. For very large or unusual payments, a bank or SWIFT wire may be the only route. Compare the total cost and the amount the supplier receives, not just the transfer fee.
How do I pay international vendors without losing money on FX?
Agree the invoice currency up front, convert yourself before you send so the receiving bank does not convert for you, compare your rate with the mid-market rate at the same moment, and hold the currencies you pay often so you convert once, when you choose.
Should I pay suppliers in my currency or theirs?
Usually in theirs. If you send your own currency, the supplier's bank converts it at a rate neither of you sees in advance, and the supplier may receive less than the invoice. Paying in the supplier's currency, converted by your own provider, lets you see the cost before you confirm.
How long do overseas business payments take?
From seconds to several business days. Local payouts over instant rails can arrive the same day; SWIFT payments depend on the route, cut-off times and the receiving bank. Allow for time zones, weekends and public holidays when you set payment dates.
How does KwiikPay help pay international suppliers?
KwiikPay holds named GBP, EUR and USD accounts in your company's name, converts between 40+ currencies with the margin shown before you confirm, and pays suppliers across 30+ corridors to 80+ countries through regulated banking partners, from the dashboard or, depending on your plan, by API. It does not offer card payments.
