Guide · B2B payments

What are B2B payments? Methods, costs and how to choose

B2B payments are the payments one business makes to another, usually for goods or services bought on an invoice. They run on bank transfers, cards, cheques or newer platforms, and are larger, slower to approve and harder to reconcile than consumer payments. Cross-border B2B payments add currency conversion, intermediary banks and longer timings.

The short answer

  • What they are. Payments between businesses for goods or services, normally against an invoice and agreed payment terms.
  • How businesses pay. Bank transfers over national rails, international wires, direct debits, cards, cheques, virtual accounts, payment platforms and, more recently, stablecoin settlement.
  • What changes across borders. A currency conversion, a chain of banks, extra fees and longer timings. In the Financial Stability Board’s data, the exchange-rate margin made up about 87% of the average cost of a US$20,000 cross-border B2B payment.
  • How to choose. Start from the amount, the urgency, the currencies, what your supplier can accept, the total cost and the controls you need.

Figures in this guide were checked against the sources linked, on 25 October 2026. KwiikPay is one of the providers in this market, and where we describe it, we say so.

What counts as a B2B payment?

A B2B (business-to-business) payment is a payment from one business to another for goods, services or another commercial obligation. Examples:

  • A retailer paying a wholesaler’s invoice.
  • A manufacturer paying a freight forwarder.
  • A start-up paying a software vendor’s annual subscription.
  • A company paying a contractor’s limited company.
  • One group company settling a balance with another.

Salaries are not B2B payments, because the payee is a person. B2B payments are also only one part of B2B finance, which covers business accounts, FX, lending, invoice finance, trade finance and insurance. Payments are the part that moves the money, and they are the subject of this guide.

What is a B2B transaction?

A B2B transaction is the commercial deal between two businesses: the sale of goods or services, with its price, currency, delivery date and payment terms. The B2B payment is the transfer of money that settles it. The two are separate. The same transaction can be paid by bank transfer, card or cheque, and a payment can be late, partial or disputed while the underlying deal stands.

What is a trade payment?

A trade payment is a payment for goods or services bought in a commercial deal, usually due after delivery under agreed terms. In a domestic sale the terms are often written as “net 30”, meaning payment is due 30 days after the invoice date. Accountants call the amounts a business owes its suppliers on credit trade payables.

In international trade, the US International Trade Administration lists five main methods of payment: cash in advance, letters of credit, documentary collections, open account and consignment. On open account, goods are shipped and delivered before payment is due, which in international sales is typically in 30, 60 or 90 days.

How do B2B payments differ from consumer payments?

B2B paymentsConsumer payments
Size and frequencyLarger and less frequentSmaller and more frequent
TimingInvoiced, then paid after delivery on credit termsPaid at the point of sale
ApprovalOften several people, with limitsOne person
PaperworkContract or purchase order, invoice, remittance adviceA receipt
MatchingReconciled to invoices and the ledgerLittle or none
MethodsBank transfer, cheque, card, payment platformCards and wallets

How does a B2B payment work?

  1. Order. The buyer sends a purchase order or signs a contract that sets the price, currency and payment terms.
  2. Delivery and invoice. The seller delivers and issues an invoice with a due date and bank details.
  3. Approval. The buyer checks the invoice against the order and the delivery, then approves it, often in more than one step.
  4. Payment. Finance sends the money by the chosen method on or before the due date.
  5. Settlement. The payment rail moves the money. Timing depends on the rail, the currencies and cut-off times.
  6. Reconciliation. The seller matches the incoming payment to the invoice, and both sides record it for their accounts and audit trail.

The usual friction points are manual approvals (step 3), slow or costly rails (step 5) and payments that arrive without a clear reference (step 6). Most of the tools below exist to fix one of those three.

B2B payment methods compared

There is no single best method. Each of these business payment options trades off speed, cost, reach and control. Most are electronic (digital) payments, instructed online or through an API. Cheques are the paper exception.

MethodHow it worksBest forMain trade-off
Domestic bank transferThe buyer sends money from its account to the supplier’s over a national scheme such as ACH, Faster Payments or SEPARoutine invoices in one currency and countrySchemes differ by country, and most do not cross borders
International wire (SWIFT)A bank-to-bank payment instructed over the SWIFT network, often through correspondent banksReaching a supplier’s bank almost anywhereFees and timing can be hard to predict, and an FX margin applies
Direct debitThe supplier collects on agreed dates under a mandate the buyer has authorisedRegular, recurring invoicesThe buyer has to manage mandates, and rules differ by country
Corporate or virtual cardThe buyer pays by card, or with a single-use card number issued for one supplier or invoiceSmaller invoices, subscriptions and a short credit periodThe supplier pays the acceptance fee
Cheque (check in the US)A paper instruction to the buyer’s bank to pay the supplierSuppliers that only accept paperSlow, manual and a leading fraud target
Virtual account (vIBAN)A dedicated account number that routes incoming money to a main account and identifies the payerCollecting from many customers and matching each payment to an invoiceQuality depends on the issuer, so check whose name the payer sees
Payment platformSoftware or a provider that bundles accounts, approvals, FX, payouts and reconciliationTeams with volume, several currencies or several approversIntegration effort, and you need to check the provider’s regulatory status
Stablecoin settlement (guide)The value leg moves on a blockchain in a dollar- or euro-linked token, with ordinary money in and outCross-border payments outside banking hoursNeeds on- and off-ramps and a counterparty that accepts it, and rules differ by country

Bank transfer rails by region

A domestic bank transfer, the simplest kind of B2B money transfer, runs on a national payment rail. The main ones, as their operators describe them:

Bank transfer rails carry very large B2B volumes. Nacha counted 8.08 billion B2B payments worth $63.11 trillion on the US ACH Network in 2025, and B2B volume grew almost 10% on the year. In the euro area, banks have had to receive instant euro payments since 9 January 2025 and send them since 9 October 2025, at no higher charge than a standard credit transfer (ECB). For a side-by-side comparison that also covers SWIFT and stablecoin networks, see cross-border transactions and payment rails.

Cards, cheques and direct debit

Cards. A corporate or virtual card can give the buyer a short credit period and itemised spend data, but the supplier pays for acceptance. The UK Payment Systems Regulator defines the merchant service charge as the total merchants pay their acquirers, made up of interchange fees, scheme fees and the acquirer’s net revenue. That is why cards tend to suit smaller invoices.

Cheques. Cheques still turn up where a supplier prefers paper, but they are slow to process and a leading fraud target. In the Association for Financial Professionals’ 2026 survey of 465 US treasury practitioners, 58% said checks were targeted by fraud in 2025, against 30% for ACH debits and 25% for wire transfers. In the UK, the image clearing system handled about 78.7 million cheques in 2025, down 15.7% on 2024.

Direct debit. The supplier collects on agreed dates under a mandate the buyer has authorised. It suits regular invoices, but the rules on authorisation and refunds differ by scheme and country.

Virtual accounts, payment platforms and payment automation

A virtual account, called a virtual IBAN or vIBAN in Europe, is an account number that routes incoming money to a main account while showing who paid. Give each customer, subsidiary or invoice batch its own number and incoming payments can be matched automatically, even when the payer leaves out a reference. Quality varies. With a named virtual account the payer sees your company as the beneficiary, while with a pooled arrangement they pay the provider’s name and quote a reference. Our virtual IBAN guide explains the difference and what to check.

B2B payment platforms bundle some or all of the following: accounts in several currencies, approvals, FX, payouts to suppliers and reconciliation. Some are payables tools that sit on top of your bank. Others are regulated payment providers that hold the accounts themselves. Either way, check the provider’s status on the relevant public register, ask how client money is held, and ask for the all-in cost in writing.

What is payment automation?

Payment automation is the use of software to run the steps between an approved invoice and a reconciled payment: scheduling, approval routing, sending the money and matching it to the invoice, with little manual keying. Typical building blocks are:

  • Approval workflows with roles and limits.
  • Scheduled and recurring payment runs.
  • Checks on payee details before the first payment.
  • Payments triggered by API, with status updates by webhook.
  • Automatic matching of incoming money to invoices, through virtual accounts or structured references.

Automation cuts re-keying and leaves a clean audit trail, but it also makes a bad process run faster. Put the controls in first: approval limits, separate people to create and approve, and payee checks (see the controls section below).

Stablecoin settlement: a newer B2B payment option

A stablecoin is a crypto-asset designed to hold a steady value against a currency such as the US dollar or the euro. In stablecoin settlement the payer’s money is converted into a stablecoin, sent across a blockchain and converted back into the recipient’s currency. Compared with a wire, the value leg can move within minutes, at any hour, without waiting for bank cut-offs.

The trade-offs matter. Both sides need a route in and out of ordinary money, the supplier must be willing to receive the payment, network fees apply, the reserves behind the stablecoin matter, and the rules differ by country and by activity. Regulated providers screen the parties and, for crypto-asset transfers, apply the Travel Rule. For more, see stablecoin settlement for business, stablecoin vs SWIFT, what a stablecoin is and whether stablecoins are safe.

Global business payments: what changes across borders

Global business payments are B2B payments that cross a border and usually a currency. Compared with a domestic payment they add a currency conversion, a link between two countries’ payment systems (often through correspondent banks), extra fees and compliance checks, and longer, less predictable timings. Our guide to cross-border transactions and payment rails explains the mechanics step by step, and correspondent banking covers the bank chain. This section covers what the data says about B2B payments in particular.

Cost: the exchange rate matters most

When a payment changes currency, someone converts it at a rate. The mid-market rate is the midpoint between the buy and sell prices in the interbank market. The FX margin is the gap between that rate and the one you are given. The Financial Stability Board (FSB), which reports to the G20 on cross-border payments, defines FX cost as the difference between the rate a service charges and the interbank rate.

In its October 2025 report, using price data from FXC Intelligence as of March 2025, the FSB put the average cost of sending US$20,000 across a border as a B2B payment at 1.6%: 1.4% in FX cost and 0.2% in fees. About 87% of the cost was the exchange rate, not the transfer fee. A low headline fee can sit alongside a wide margin.

Speed and transparency

The FSB’s speed measure for B2B payments uses the delivery times that providers advertise, not measured arrivals. It is still a useful guide to what a sender is told to expect.

B2B measure (FSB, data to March 2025)ResultG20 target for end-2027 (retail payments, which include B2B)
Average cost of a US$20,000 payment1.6%No more than 1% on average, with no corridor above 3%
Share of that cost that is FXAbout 87%Not targeted
Services advertising delivery within one hour2.2%75% of payments available to the recipient within one hour
Services advertising delivery within one business day39.6%Not targeted separately
Services that publish a price and also a delivery time43.2%All providers to show total cost, expected delivery time, tracking and terms

The FSB’s own conclusion, in October 2025, was that satisfactory improvements at the global level are unlikely to be achieved in line with the 2027 timetable. The targets themselves are on the FSB’s G20 targets page.

Ways to cut cost and delay

  • Ask for the total cost and the amount the recipient will get, in writing, before you send.
  • Compare the rate with the mid-market rate on the same day.
  • Pay in the invoice currency where you can, and hold the currencies you pay often so you convert once, when you choose.
  • Where a provider offers local payouts at the destination, use them instead of a long chain of banks.
  • Allow for cut-off times, time zones and weekends when you set payment dates.

How to choose a B2B payment method

If you need to…It usually fitsWhy
Pay a large, urgent amount in one countryA same-day high-value system (CHAPS, Fedwire or Lynx), or a bank wireSettles the same day, and a Fedwire payment is final once processed
Pay routine invoices in one country or the euro areaFaster Payments, SEPA or ACHBuilt for everyday payments, though your bank sets fees and limits
Run scheduled batches, such as supplier runsBacs Direct Credit or ACH creditsBatch schemes with fixed processing cycles
Pay abroad in a major currencyAn international wire, or a provider with accounts and payout rails in that currencyPay in the invoice currency, convert once and compare the rate with the mid-market rate
Pay abroad outside banking hours to a counterparty that can receive itStablecoin settlement, where eligibleThe value leg settles on-chain at any hour
Pay a small invoice and want a short credit periodA corporate or virtual cardThe supplier must accept cards and pays the acceptance fee
Collect from many customersVirtual accountsEach payer gets a number, so payments match automatically

Whichever method you pick, ask any bank or provider the same six questions:

  1. What is the total cost, including the FX margin against the mid-market rate, the transfer fee and any fees taken by intermediary or receiving banks?
  2. When will the money arrive, and which cut-off times apply?
  3. Is the payment final once sent, and what happens if the details are wrong?
  4. What reference data travels with the payment, and how will we reconcile it?
  5. Who can approve payments, with what limits, and is there an audit trail?
  6. How is the provider regulated, where can we check it on a public register, and how is client money held?

If you are shortlisting providers, our guide to the best business account for international payments sets out a checklist.

Fraud, errors and controls

B2B payments are large and, once processed, can be impossible to recall: a Fedwire payment, for example, is final and irrevocable. That makes them a target. The FBI’s Internet Crime Complaint Center describes business email compromise (BEC) as a scam targeting businesses working with suppliers or regularly making wire transfers, where fraudsters compromise email accounts or other communications to trigger an unauthorised transfer. It received 24,768 BEC complaints in 2025, with reported losses of about $3.05 billion. In the AFP survey, 74% of US organisations were affected by BEC in 2025.

Practical controls:

  • Verify any change to a supplier’s bank details by calling a number you already hold, not one given in the request.
  • Use payee-name checks where they exist. In the UK, Confirmation of Payee lets you check the name on an account, including a business account, before you pay. In the euro area, providers have to offer a verification of payee service from 9 October 2025.
  • Separate duties: one person creates a payment, another approves it, with limits by amount.
  • Review new beneficiaries before the first payment.
  • Reconcile daily and keep an audit trail.
  • Know your counterparty. Regulated providers run KYB checks on business customers before they open an account.

Where KwiikPay fits

KwiikPay is a payments provider for businesses, not a bank, and it does not offer card acceptance. It covers the account, FX and payout side of B2B payments:

  • Named accounts. GBP, EUR and USD accounts in your company’s name, held apart from KwiikPay’s own money.
  • FX. Conversion across 40+ currencies at wholesale-based rates, with the spread shown before you confirm.
  • Payouts. Payments to suppliers and contractors across 30+ corridors and 80+ destination countries. They go through regulated banking partners over rails such as SEPA Instant, Faster Payments, Fedwire and SWIFT, depending on your plan, and, for eligible customers, on-chain in USDC and EURC on Ethereum and USDT on Ethereum, BSC and Tron.
  • Controls. Maker-checker approvals, role-based access and an audit trail on every payment, unique references and exportable records for reconciliation, and, depending on your plan, a REST API with idempotency keys and signed webhooks.
  • Pricing. Published on the pricing page: an FX margin over the mid-market rate, a flat fee per payment on each rail, vIBANs at £1.50 each on Starter and, on some plans, a monthly minimum. On-chain network fees are passed through at cost.

For the product detail, see business payments, cross-border payments, multi-currency business accounts, FX conversion and API payouts.

KwiikPay onboards companies incorporated in the European Economic Area, the United Kingdom, Gibraltar, Switzerland and Canada, where any authorisation their activity requires is current. Companies elsewhere are assessed individually, with no presumption of approval. Check the eligibility page first. Account opening is by invitation: request an account and the team replies within one business day. Know-your-business checks come before any account opens.

KwiikPay is a trading name of KWP Finance Limited — registered in Canada as a Payment Service Provider under the Retail Payment Activities Act (RPAA), supervised by the Bank of Canada, and as a Money Services Business with FINTRAC (MSB registration number C100000942), including dealing in virtual currency. These are registrations, not licences. KwiikPay is not authorised by the FCA. KwiikPay is not a bank; banking and e-money services are provided by regulated partner institutions.

Paying or getting paid across borders?

Tell us your currencies, corridors and volumes and the right person will reply within one business day. Or check eligibility and request an account.

Talk to sales Request an account

B2B payments data and reports

Looking for numbers to cite or track? These are the primary sources behind this guide. They update regularly, so check the date before you quote one.

This is general information, not legal or financial advice.

FAQs

What are B2B payments?

B2B (business-to-business) payments are payments one business makes to another for goods or services, usually against an invoice and agreed payment terms. Examples include paying a supplier, a wholesaler, a contractor's company or a software vendor. Compared with consumer payments they are larger, need approvals and have to be matched to invoices.

What are the main B2B payment methods?

The main B2B payment methods are bank transfers over national rails (such as ACH, Faster Payments, SEPA, CHAPS and Fedwire), international wires over SWIFT, direct debits, cards including virtual cards, cheques, virtual accounts, payment platforms and, more recently, stablecoin settlement. The right one depends on the amount, the urgency, the currency and what your supplier can accept.

How are B2B payments different from B2C payments?

B2B payments are usually larger and paid against an invoice after delivery, on terms such as net 30. They often need approval from more than one person and are reconciled to purchase orders and the ledger. B2C payments are usually small, paid at checkout by one person with a card or wallet, and need little reconciliation.

What is a trade payment?

A trade payment is a payment for goods or services bought in a commercial deal, usually due after delivery under agreed terms such as net 30. In international trade, the US International Trade Administration lists five main payment methods: cash in advance, letters of credit, documentary collections, open account and consignment.

How long do B2B payments take?

It depends on the rail. Faster Payments are normally credited within seconds, SEPA Instant within ten seconds, a SEPA Credit Transfer within one banking business day and a Bacs Direct Credit in three working days. ACH settles in batches on banking days. Cross-border payments are slower: in the Financial Stability Board's data to March 2025, only 2.2% of B2B payment services advertised delivery within an hour and 39.6% within one business day.

How much do cross-border B2B payments cost?

The Financial Stability Board put the average cost of sending US$20,000 across a border as a B2B payment at 1.6% in March 2025, and about 87% of that was the exchange-rate margin rather than the transfer fee. Costs vary by provider and route, so compare the rate with the mid-market rate and ask about intermediary and receiving-bank fees before you send.

What is payment automation?

Payment automation is the use of software to run the steps between an approved invoice and a reconciled payment: scheduling, approval routing, sending the money and matching it to the invoice. It cuts manual keying and gives a clear audit trail, but it needs controls such as approval limits and payee checks, or it simply makes mistakes faster.

Can businesses pay each other in stablecoins?

Yes, where both sides have a route in and out of ordinary money and the rules allow it. The payer's money is converted to a stablecoin, sent over a blockchain and converted back. It can settle in minutes at any hour, but it needs on- and off-ramps, network fees and a willing counterparty. KwiikPay supports USDC and EURC on Ethereum and USDT on Ethereum, BSC and Tron for eligible customers.

Related
Business payments → Cross-border payments → Multi-currency business accounts → Cross-border transactions and payment rails → Virtual IBANs, explained → FX conversion → API payouts → What is a SWIFT payment? → Stablecoin settlement for business → Pricing →

Open your first IBAN today.

Open a multi-currency account, subject to KYB, screening and our risk appetite.

Talk to sales